Bluesound BSW150 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Subwoofer Bluesound BSW150. Bluesound BSW150 13. Network powered subwoofer

Symptom

No sound

Sounds distorted

Hum

See your dealer if you require service. Authorized Bluesound dealers are equipped to handle almost all problems.

You may locate your nearest Bluesound authorized dealer online at www.bluesound.com. If the problem is not

resolved, please contact us, providing the model name, serial number, date of purchase, dealer name, and a full

description of the problem.

Action

Ensure the power cord is connected to the subwoofer and plugged into a live AC

outlet.

The BSW150 utilizes signal sensing auto on/off circuitry. If no signal is sent

to the subwoofer, it will not power up. When using the subwoofer output of a

receiver or processor, no signal may be immediately present in this output. The

subwoofer will only power up when bass signal appears at the subwoofer input.

If the wireless connection or low level cable is poor or has been severed, the

subwoofer may not make a sound.

Lower volume if the subwoofer begins to sound distorted to determine if

playback at a lower level solves the problem. If a slight reduction in level solves

the problem, then the subwoofer level was too high. If the distorted sound

remains at a low level, the driver may be damaged.

Hum that appears when using the BSW150's low level input(s) is usually caused

by using an inferior, damaged, exceptionally long low level cable or cables

routed near high current wiring/appliances. Replace/shorten the low level cable

connecting the subwoofer to the source equipment (receiver or processor). Low

level cable runs of longer than 20 feet may require the use of a line driver (not

available from Bluesound).

TROUBLESHOOTING