Bluesound BSW150 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Subwoofer Bluesound BSW150. Bluesound BSW150 13. Network powered subwoofer

FUNCTION BUTTON :

A) TOGGLE SUB ON/OFF: When the BSW150 is network-paired to another Player, pressing the Function

Button once will toggle the Player's Subwoofer ON/OFF switch in the BluOS App. With the switch set to

ON, a crossover is engaged: the BSW150 will handle the low frequency while the paired Player will handle

the higher frequency content, as dictated by the crossover level. With the switch set to OFF, the crossover is

disengaged and the paired Player handles the full frequency range. The BSW150 will be silent in this case.

Note that using this toggle does not unpair the BSW150 from a Player. Further, this function does not work

when multiple BSW150 are paired to a Player.

B) STANDBY: Press and hold the Function button for 5 seconds to place the BSW150 into Vacation Mode

(0.5W Standby). In Vacation Mode, all network activity will cease and the subwoofer will not appear in the

BluOS App. Press the Function button again to restore the BSW150 to Ready Mode.

C) UPGRADE MODE: To manually place the BSW150 into Upgrade Mode, first disconnect it from electrical

power. Wait a moment, then reconnect power. Press and hold the Function button until the LED turns Green

and then back to RED, then release. The LED will immediately turn Green and then back to Red. The BSW150

is now in Upgrade Mode. This is only necessary in specific cases with authorization from a Bluesound support

representative.

D) FACTORY RESET – more information on Factory Reset is available on page 9 of this manual.

MOUNTING FOOT : The BSW150 can be placed in several orientations, including (but not limited to) laying

flat on its back or mounted to the wall. The back panel Mounting Foot (x4) provides the necessary cushion

to help prevent unwanted vibrations when the BSW150 is laying on its back. The Mounting Foot is also the

attachment point for wall mounting; the shaped groove in the Mounting Foot slides onto the rubber foot on the

supplied wall mount bracket and uses gravity to lock into place.

LOW/LINE LEVEL INPUT : For connecting the BSW150 via wire to another Bluesound Player that has a wired

SUB OUT, or alternatively to a separate component preamplifier, integrated amplifier, or receiver, at line level.

SERVICE : Use the Service port in conjunction with USB (Type B Mini) to load firmware on the BSW150. This

is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and Service

control button.

AC MAINS INPUT : Select the AC power cord appropriate for your region (included). Before connecting the plug

to the wall outlet, firmly connect the other end of the AC power cord to the BSW150 AC Mains input socket.

Never force the plug into a wall outlet. An adaptor may be necessary in certain regions. Always disconnect the

plug from the wall outlet first, before disconnecting the cable from the BSW150 AC Mains input socket.

USB (TYPE B) : Use the Service port in conjunction with USB (Type B Mini) to load firmware on the BSW150.

This is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and

Service control button.

USB (TYPE A) : Use the USB (Type A) port for manual software upgrades. This is only necessary in specific

cases with authorization from the Bluesound Support Crew.

LAN PORT : The LAN port connection is used with an Ethernet cable (not provided) for network connection

and control. This is an optional connection since the BSW150 can be connected to the network through Wi-Fi.

If you are using wired Ethernet for network, connect one end of the Ethernet cable to the BSW150 LAN port,

and the other end directly to your router or switch.

MAGNETIC RUBBER FEET : When the BSW150 is placed in a standing position, use the supplied magnetic

rubber feet (x2) to help prevent unwanted vibrations. The magnets are mounted inside the cabinet of the

BSW150. Simply place the magnetic rubber feet near the required location and they will snap into place.

IDENTIFICATION OF CONTROLS