D&K Expression 42 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Laminator D&K Expression 42. D&K Expression 42 18.

Nip Adjusters

The Nip Adjusters are Located on the left hand side of the laminator and is operated from the front of the

machine.

The Nip Adjusters are used to adjust the height of the rollers.

To Operate the Nip Adjusters:

Grasp it with your left hand and pull out approximately 1/4" (6mm) to the left.

Once the knob has disengaged from the stop, it may be rotated forward or backward (clockwise or

counter-clockwise, as viewed from the left hand side of the unit).

To Set the Height of the Rollers:

Continue to rotate the Nip Adjusters until the desired measurement corresponds with the indicator of

the knob.

Select the measurement that indicates the thickness of the material you will be using with the machine.

Release the knob so that it moves back to the right and clicks into place, this will set the rollers for use.

The measurements on the knob, ½", ¼" (6mm), 3/16" (5mm), 1/8" (3mm) and 1/16" (1.5mm) correspond

to board thickness'.

For additional pressure, stop control knob between indicated thicknesses. There is also a fully closed

stop, 0" (0mm) for film pouch applications.