Asko WM25 Manuale di servizio - Pagina 9
Sfoglia online o scarica il pdf Manuale di servizio per Lavatrice Asko WM25. Asko WM25 16.
Anche per Asko WM25: Manuale di servizio (20 pagine), Manuale di servizio (16 pagine)
Stampa la pagina
Testing element, motor, thermistor, high level, for leakage, drain pump, spinning
and door opening
7.
Press the start/stop button (S1).
• The element switches on.
• The washing sequence starts.
• The water is heated to 20°C.
• The element switches off.
• The washing cycle ends.
• Valve 1 opens until level P6 (rinse level) is reached.
• Valve 2 opens for 10 seconds.
• Valve 4 opens for 10 seconds.
• The washing sequence starts.
• Leak test carried out for 20 minutes.
• The drain pump runs until level P1 (empty machine) is
reached.
• The washing cycle ends.
• Spinning at max rpm occurs for 1 minute.
• The door opens.
The test programme then stops automatically and "End" is shown in the display (applies to machines with a
display).
Indication of faults:
Fault indication/symp-
Cause
tom
LED L1 and L2 flash.
Warming up fault: The
temperature rises to
20°C within one minute.
LED L2 flashes.
Warming up fault
: The temperature has
not increased by 20°C
within 10 minutes.
LED L3 flashes, the
Fault at water intake
test programme stops
(valve 1)
and "End" is shown in
the display (applies
to machines with a
display).
LED L4 and L5 flash,
Fault during leak test
the test programme
(pressure drop)
stops and "End" is
shown in the display
(applies to machines
with a display).
LED L4 flashes, the
Fault during draining
test programme stops
and "End" is shown in
the display (applies
to machines with a
display).
LED L5 flash.
Fault during spin cycle
Service manual WM25
9