Ambient Technologies TSMT Manuale di istruzioni per l'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Timer Ambient Technologies TSMT. Ambient Technologies TSMT 9. Touch screen manual timer

Stampa la pagina

n Safety Features

1. Low Battery Detection

When low battery condition occurs, the transmitter will turn off the fireplace.

A) Battery voltage is checked every one minute. When the battery voltage is low, the LCD displays a low bat-

tery icon which will exist in all modes.

B) The transmitter will not operate with low battery voltage. Change the batteries before the batteries become

too weak for normal operations.

2. Power On Initialization

After the power-on initialization, the transmitter sends a signal to turn off the fireplace.

3. Thermal Shutdown

When the ambient temperature is more than 99°F, the transmitter will turn off the fireplace.

A) The LCD will display "HI".

B) The Transmitter will not function until the room temperature has dropped below 99 degree Fahrenheit.

4. Low Temperature Condition

When the ambient temperature is less than 40 degrees Fahrenheit, the LCD will display "LO", and NO SIGNAL will

be sent to turn on the appliance.

A ll functions still remain the same for both Manual Mode and Timer Mode

5.Child-proof Protection

The child-proof icon will be shown when the child-proof mode is activated by pressing the ON button and

f i r e - p a r t s . c o m

the OFF button at the same time for three seconds.

A) Enter childproof mode by pressing and holding both the ON button and the OFF button simultaneously

for 3 seconds. The Childproof indicator will be shown on the LCD.

B) Deactivate childproof mode by pressing and holding the ON button and the OFF button simultaneously

for 3 seconds again. The Childproof indicator disappears on the LCD.

C) The transmitter can not be operated in childproof mode.

Symptom

1. Battery icon on LCD on transmitter

2. LCD display is blank

3. LCD display shows "funny" display

4. Appliance does not come on

20300538

TROUBLESHOOTING

Causes

1. Low Battery

2. The transmitter did not match

with the receiver

3. Transmitter measures temp-

erature exceeding 99 degrees

Fahrenheit and shows "HI" on

LCD

4. Distance between the transmitter

and receiver is more than 30 feet

5. Receiver not turned on.

6. Wiring loose or no correct.

Touch Screen Transmitter Manual Timer Instructions

1. Replace batteries. Change batteries

every 6 months.

2. Check battery installation or replace

batteries.

3. Reset the transmitter (see "Resetting

the Transmitter" section).

1. Make sure the transmitter has

learned to the receiver.

1. Move transmitter to a cooler place

and wait until temperature drops

below 99 degrees.

1. Make sure the opening distance is

less than 30 feet.

1. Set receiver to R/S.

1. Check wire connection (TH/TP/TH).

FP2612

low battery

FP2613

FP2614

lo no child

Action

Page: