Ambient Weather WH2F Manuale d'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso per Stazione meteorologica Ambient Weather WH2F. Ambient Weather WH2F 20.
1. DST (daylight savings time)
2. WWVB Radio Controlled Time
3. Time
4. Radio Controlled Clock reception
icon
5. Alarm ON indicator
6. Day of week/ time zone
7. Date
8. Indoor humidity display
9. Indoor temperature and humidity low
alarm and high alarm
10. Indoor temperature display
11. Temperature display units
12. Indoor temperature and humidity
alarm on indicator
13. Remote sensor transmit signal
indicator
14. MIN/MAX information
15. Dew point temperature display
2.4.3 Sensor Operation Verification
Verify the indoor and outdoor humidity match closely with the console and sensor array in the same
location (about 10' apart). The sensors should be within 10% (the accuracy is ± 5%). Allow about 30
minutes for both sensors to stabilize.
Verify the indoor and outdoor temperature match closely with the console and sensor array in the same
location (about 10' apart). The sensors should be within 4°F (the accuracy is ± 2°F). Allow about 30
minutes for both sensors to stabilize.
3 Remote Sensor Installation
3.1 Sensor Placement
It is recommended you mount the remote sensor outside on a north facing wall, in a shaded area, at a
height at or above the receiver. If a north facing wall is not possible, choose a shaded area, under an
eve.
Direct sunlight and radiant heat sources will result in inaccurate temperature readings. Although the
sensor is weatherproof, it is best to mount in a well-protected area, such as an eve.
Use 3 screws (included) to affix the mounting bracket to the wall with a precision screwdriver.
Connect the remote sensor to the wall bracket. It is recommended to drill pilot holes first.
Version 2.1
©Copyright 2015,
16. Outdoor humidity display
17. Outdoor temperature and humidity
low alarm and high alarm
18. Temperature display units
19. Outdoor temperature display
20. General outdoor alarm icon
21. Weather forecast icon
22. Weather tendency indicator
23. Pressure with 24 hour history graph
24. Pressure high alarm
25. Pressure low alarm
26. Absolute or relative air pressure
selection
27. Barometer air pressure
28. Pressure display unit (inHg or hPa)
29. Pressure alarm ON indicator
NOTE: The snooze key is on the top of
the display console
Page 6