1010music Bitbox MK2 1.0 Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Campionatori 1010music Bitbox MK2 1.0. 1010music Bitbox MK2 1.0 2.

Stampa la pagina
1010music Bitbox MK2 1.0 Manuale di avvio rapido
To Play Pads
There are three ways to trigger playback of a pad:
1.
Touch a pad to play the corresponding WAV file.
2.
Plug a gate signal into the corresponding input jack sockets. The array of input jacks map 1:1 to the array of pads on screen.
3.
Plug a MIDI controller into the MIDI input jack socket and play MIDI notes. The pads respond to input from any MIDI channel on
notes C2 (MIDI 36) through G2 (MIDI 43) by default.
To Load and Configure a Pad:
1.
Touch a pad in the grid or turn a knob to select a pad. The pads that have WAV files loaded will have text labels.
2.
Press the
button. If the pad was empty, the Load and Record screen will be displayed. If the pad already had a WAV file
INFO
assigned, the Waveform screen will be displayed.
3.
If you are on the Load and Record screen, touch
the Waveform at the top of the screen. You will now be on the WAV file selection screen.
4.
Turn a knob to select a file or directory. Touch
5.
Touch
to drill into a folder and to assign a WAV file to the pad. You will now see the Waveform screen.
Load
6.
Touch the Pad Mode icon to the left of the WAV file name at the top of the screen to display the Pad mode menu. Touch an
option to select it. The icon changes to represent the selected pad mode.
7.
Press the
button repeatedly to cycle through the Waveform screen and the Parameter screen. Touch a tab at the bottom of
INFO
the Parameters screen to access more parameters.
8.
Turn the control knob nearest to a parameter to select a value for the parameter. Touch options at the top of the parameters
screen to change these options.
9.
On the Main Pad Parameters screen, to the right of the grid icon at the top is the output selection button. Touch this button to
display the list of output options. Choose an option to set the stereo or mono output destination for the pad.
10. Press the
button to return to the Main screen.
HOME
To Record a WAV File:
1.
Plug the recording source into the
2.
Touch a pad in the grid on the touchscreen to select it.
3.
Press the
button. If the pad is empty, bitbox will display the Load and Record screen. If the pad is already loaded, bitbox will
INFO
display the Waveform screen. If you are on the Waveform screen, press the Pad Mode icon to the left of the WAV file name at the
top of the screen and then touch
4.
Set
to
or
Rec Mon
Auto
5.
Touch the
button. Bitbox will start recording. The timing of the recording can be synchronized with the clock by using the
Rec
parameter. Recording will start when a signal is received if you set the Threshold parameter to
Quant
6.
Touch the
button. The recording will end. If you configured a recording length, bitbox mk2 will stop recording when the
Stop
target length is reached. The file will be saved in a folder with the same name as the preset under the \Presets folder on the
microSD card.
To Mix and Mute Pads:
1.
Press
until you see the Menu screen, then touch
HOME
knob to adjust the Pan for each pad.
2.
Press
to activate Mute mode. Active pads will have a green background. Muted pads will be red. Tap a pad to toggle mute
INFO
on or off for that pad.
Presets
Bitbox mk2 stores pad configurations as Presets. A number of demonstration presets are preloaded on the micro SD card.
To Save Changes to a Preset:
1.
Push the
button until you see the Menu screen, then touch the
HOME
2.
Touch
or
then
Save
File
To Load a Preset:
1.
Push the
button until you see the Menu screen, then touch the
HOME
2.
Turn a knob to select a preset, then touch
Note:
•
Bitbox mk2 does not automatically save your changes. Any unsaved changes will be lost when you load a preset or power down
the module.
Page 2 of 2
1 May 2020
Load
Play
and
jacks.
IN1
IN2
. You will now see the Load and Record screen.
New Recording
if you want the input source to play through the output jacks,
On
to save changes. Save is disabled if there are no unsaved changes.
Save As
to make this the active preset.
Load
in the top menu bar. If you are on the Waveform screen, touch the name of
to toggle auto-preview of files.
. Select a pad, then use a top knob to adjust the level, and a bottom
Mix
button to access the Preset Management screen.
Presets
button to access the Preset Management screen.
Presets
and
OUT1
OUT2.
.
On
Copyright 1010music LLC 2020
Rec