Ambient Weather F007TP Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Termometro Ambient Weather F007TP. Ambient Weather F007TP 10. 8-channel wireless probe thermometer

1. Remove the battery door on the back of the sensor by removing the set screw, as shown in

Figure 1 .

2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the

transmitter.

Figure 2 displays all four switches in the OFF position (factory default setting).

3. Channel Number: The sensor supports up to eight transmitters. To set each channel number

(the default is Channel 1), change Dip Switches 1, 2 and 3, as referenced in Table 1.

4. Temperature Units of Measure: To change the transmitter display units of measure (°F

vs. °C), change Dip Switch 4, as referenced in Table 1.

Version 1.0

Figure 1

Figure 2

Page 3