Ambient Weather F012TH Manuale d'uso

Sfoglia online o scarica il pdf Manuale d'uso per Termometro Ambient Weather F012TH. Ambient Weather F012TH 7. Wireless indoor thermo-hygrometer

F012TH Wireless Indoor Thermo-Hygrometer User Manual

1. Introduction

Thank you for your purchase of the F012TH Wireless Indoor Thermo-Hygrometer. The following user

guide provides step by step instructions for installation, operation and troubleshooting.

2. Getting Started

Note: The power up sequence must be performed in the order shown in this section (insert batteries

in the remote transmitter(s) first, Display Console second).

Indoor Thermo-Hygrometer Sensor Set Up

1. Remove the battery door on the back of the display, as shown in Figure 1. Insert two AAA

(alkaline or lithium, avoid rechargeable) batteries in the back of the indoor sensor.

After inserting the batteries, All of the LCD segments will light up for a few seconds to verify all seg-

ments are operating properly. and then

the sensor is transmitting data.

2. Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on

the display, as shown in Figure 2.

Page 1

Figure 1

icon flash once per 60 seconds thereafter. Each time it flashes,