Ambient Weather WS-70 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Termometro Ambient Weather WS-70. Ambient Weather WS-70 14. Wireless indoor/outdoor 8-channel thermo-hygrometer with jumbo display

Stampa la pagina

Problem

Temperature sensor reads too high in the

day time.

Indoor and Outdoor Temperature do not

agree

Indoor and Outdoor Humidity do not

agree

Display console contrast is weak

8 Accessories

The following software and hardware accessories are available for this weather station at

www.AmbientWeather.com

Accessory

Ambient Weather F007TH Wireless

Thermo-Hygrometer

Version 1.0

Solution

Make sure the remote sensors are not transmitting

through solid metal (acts as an RF shield), or earth

barrier (down a hill).

Move the display console around electrical noise

generating devices, such as computers, TVs and other

wireless transmitters or receivers.

Move the remote sensor to a higher location. Move the

remote sensor to a closer location.

Make sure the thermo-hygrometer is mounted in a

shaded area on the north facing wall. Consider the

following radiation shield if this is not possible:

http://www.ambientweather.com/amwesrpatean.html

Allow up to one hour for the sensors to stabilize due to

signal filtering. The indoor and outdoor temperature

sensors should agree within 2 °F (the sensor accuracy is

± 1 °F).

Use the calibration feature to match the indoor and

outdoor temperature to a known source.

Allow up to one hour for the sensors to stabilize due to

signal filtering. The indoor and outdoor humidity sensors

should agree within 10 % (the sensor accuracy is ± 5 %).

Use the calibration feature to match the indoor and

outdoor humidity to a known source.

Replace console batteries with a fresh set of batteries.

Description

Add additional remote

thermo-hygrometers. Supports

up to eight remote sensors.

Page 12