- ページ 4

ガスヒーター Ambirad AR35/50' SLのPDF インストレーション＆サービスマニュアルをオンラインで閲覧またはダウンロードできます。Ambirad AR35/50' SL 20 ページ。 Gas fired radiant tube heaters

ページを印刷する

Figure 1 Correct installation of flexible gas connection

Corrugated Flexible Metallic Hose Assemblies to BS 6501 Part 11984 Class 1 Type C Construction

1 Metre Long - Ambi~Rad Part No. 6500-2

COLD POSITION

Valve

NOTE:

Elbows must be fitted to eliminate

50 ± 2 0 mm

sharp bends near end fittings.

± 5 mm

Valve

Union end

Corrugated Flexible Metallic Hose Assemblies to BS 6501 Part 11984 Class 1 Type C Construction

600 mm Long - Ambi~Rad Part No. 6500

COLD POSITION

Valve

NOTE:

Elbows must be fitted to eliminate

50 ± 2 0 mm

sharp bends near end fittings.

± 5 mm

Valve

X X

Union end

COLD POSITION

X X

COLD POSITION

HOT POSITION

*NOTE*

*NOTE* - CORRECT INSTALLATION AS SHOWN WILL ALLOW

FOR APPROX. 150 mm OF MOVEMENT DUE TO EXPANSION.

THIS INSTALLATION LAYOUT IS THE ONLY METHOD RECOMMENDED

BY THE INSTITUTE OF GAS ENGINEERS,THE MANUFACTURER AND

AMBI-RAD LTD

N.B. BURNER ILLUSTRATED IS AR SERIES, BUT INSTRUCTIONS

ARE EQUALLY APPLICABLE TO ALL OTHER RANGES OF BURNERS.

NOTE:THESE INSTRUCTIONS MUST BE CARRIED OUT IN

ACCORDANCE WITH THE RELEVANT PROVISIONS OF THE

GAS SAFETY (INSTALLATIONS AND USE) REGULATIONS 1984

(AS AMENDED) AND THE MANUFACTURERS RECOMMENDATIONS.

HOT POSITION

*NOTE*

X X

*NOTE* - CORRECT INSTALLATION AS SHOWN WILL ALLOW

FOR APPROX. 100 mm OF MOVEMENT DUE TO EXPANSION.

THIS INSTALLATION LAYOUT IS THE ONLY METHOD RECOMMENDED

BY THE INSTITUTE OF GAS ENGINEERS,THE MANUFACTURER AND

AMBI-RAD LTD

N.B. BURNER ILLUSTRATED IS AR SERIES, BUT INSTRUCTIONS

ARE EQUALLY APPLICABLE TO ALL OTHER RANGES OF BURNERS.

NOTE:THESE INSTRUCTIONS MUST BE CARRIED OUT IN

ACCORDANCE WITH THE RELEVANT PROVISIONS OF THE

GAS SAFETY (INSTALLATIONS AND USE) REGULATIONS 1984

(AS AMENDED) AND THE MANUFACTURERS RECOMMENDATIONS.

COLD POSITION

X X

Greater than 5 mm