- ページ 9

海上ラジオ ACR Electronics PATHFINDER 3 SART (SEARCH AND RESCUE TRANSPONDER)のPDF 製品サポートマニュアルをオンラインで閲覧またはダウンロードできます。ACR Electronics PATHFINDER 3 SART (SEARCH AND RESCUE TRANSPONDER) 19 ページ。 Search and rescue transponder (sart)

ページを印刷する

Figure 4

6.0

Sequence of Operations

The SART has primary and secondary indicating systems.

The primary system is the indicator lights and the secondary system is the buzzer. When

the switch is set to ON, the SART immediately enters the Test Mode. Here both the red

light and the buzzer are tested. Note that in noisy environments it may be difficult to hear

the buzzer. After about one second the SART goes to Receive Mode.

The SART remains in the Receive Mode until it detects a radar pulse. It then switches to

the Reply Mode and transmits a series of pulses. These pulses will appear on the

interrogating radar display as a series of arcs leading away from the SART's position. Both

SART lights flash rapidly and the buzzer emits a pulsed sound (beep) at about one second

interval indicating the Reply Mode. This sequence is repeated each time a radar signal

interrogates or transmits a valid radar signal to the SART.

interrogation stops the SART automatically returns to the Receive Mode.

With a fully charged battery the SART will operate in Receive Mode for a minimum of 96

hours. After this time period it will still respond to normal interrogation radar signals for an

additional eight hours.

When activated the SART has three Modes of operation.

These are:

• Receive - waiting for a valid interrogation by a radar

signal.

• Reply -

replying to a valid interrogation by a valid

radar signal.

• Test -

self-test sequence that checks both indicator

lights and the buzzer.

The SART must only be used in situations of Grave

and Imminent Danger.

WARNING

When the radar signal

Y1-03-0170 Rev. B