- ページ 6
アンプ AMC CVT2030MKIIのPDF 設置・操作方法をオンラインで閲覧またはダウンロードできます。AMC CVT2030MKII 12 ページ。 Ccvt stereo power amplifer
ページを印刷する
INPUT MODULE
CVT2030MKII includes with MD2101,
Standard Input Module.
The inputs are via gold plated RCA type
phono connectors. The phono sockets on
your AMC amplifier are marked "L" for left
and "R" for right channels, with the left
channel nearest the top of the cabinet.
Your connection leads will have a white or
black plug for left, and a red plug for right.
MD2102, Bridge & Balanced Input Module
and MD2103, Balanced Input Module are
Options.
LOUDSPEAKER CONNECTIONS
The loudspeaker output terminals will
accept 4mm (banana) plugs, pin connec-
tors, spade connectors or bare wires.
The amplifier has speaker outputs that will
match 4-8 Ohm speakers. Confirm the
impedance of your speakers then connect
as follows: For 8 Ohm Speakers, connect
the negative (black) speaker wire to the
"common" negative binding post.
Then connect the positive (red) cable to
the 8 Ohm red binding post.
Repeat for the right speaker.
For 4 Ohm speakers, the negative (black)
connections are the same as the 8 Ohm,
but the positive or red connection must be
to the 4 Ohm binding post. Your AMC
amplifier is capable of generating high
peak currents, so all connections must be
checked to avoid inadvertent short cir-
cuits, and to ensure a good clean contact.
UNDER NO CIRCUMSTANCES SHOULD
T H E
O U T P U T S
TOGETHER.
AC RECEPTACLE
Please use the power cord included with
the unit to plug into the AC RECEPTACLE
and wall AC outlet.
B E
S H O R T E D
A/C OUTLET
The A/C convenience outlet is fitted so
that other components can be powered
when your amplifier is switched on.
UNDER NO CIRCUMSTANCES SHOULD
THE CASE OF THE AMPLIFIER BE
OPENED BY ANYONE OTHER THAN A
Q U A L I F I E D
D A N G E R O U S
P R E S E N T
U N A U T H O R I Z E D
INVALIDATE YOUR WARRANTY.
4
E N G I N E E R ,
V O LTA G E S
I N S I D E .
R E PA I R
A S
A R E
A N Y
M AY