- ページ 4

おもちゃ Flitework PILATUS PC6-SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Flitework PILATUS PC6-S 16 ページ。

ページを印刷する

RECOMMENDED ACCESSORIES

This is a partial list of items required to finish the Pilatus PC6-S
that may require planning or decision-making before starting
to build. Order numbers are provided in parentheses.

RECOMMENDED DRIVE SET

❍ 1 x Motorset FW3535/900-4 Order No. : FWLA8004
❍ 1 x Lipo-Battery 3s 2200 mAh 30C Order No.: GPMP0861

RC EQUIPMENTS

❍ 4 x Servo TSX10 (Order No. : TACM0210)
❍ 1 x Receiver 6 channels
❍ 2 x Servo extension 15 cm Order No.: HCAQ7240
❍ 2 x Servo extension 45 cm Order No.: HCAQ7242

ADDITIONAL ITEMS REQUIRED

HARDWARE AND ACCESSORIES

In addition to the items listed in the "Decisions You Must
Make" section, following is the list of hardware and accessories
required to finish the Pilatus PC6-S. Order numbers are
provided in parentheses.
❍ Hook & Loop Velcro (GPMQ4480) or
❍ Flitework 200mm battery belt.

COVERING ACCESSORIES

❍ 21st Century® sealing iron (COVR2700)
❍ 21st Century trim seal iron (COVR2750)
❍ 21st Century iron cover (COVR2702)

ADHESIVES AND BUILDING SUPPLIES

In addition to common household tools and hobby tools, this
is the "short list" of the most important items required to build
the Pilatus PC6-S. Great Planes Pro™ CA and Epoxy glue are
recommended.
❍ 1/2 oz. Thin Pro CA (GPMR6001)
❍ 1/2 oz. Medium Pro CA+ (GPMR6007)
❍ 6-Minute Epoxy (GPMR6045)
❍ 30-Minute Epoxy (GPMR6047)
❍ Small T-pins (HCAR5100)
❍ Electric drill
❍ Drill bit set including (1/16" 3/32" 1/8" 5/64"
❍ and 1/2" bits)
❍ Small Phillips and flat blade screwdrivers
❍ (HCAR1040)
❍ Pliers with wire cutter (HCAR0630)
❍ Standard Hex wrench set (HCAR0520)
4

OPTIONAL SUPPLIES AND TOOLS

Here is a list of optional tools mentioned in the manual that
will help you build the Pilatus PC6-S.
❍ Great Planes CG Machine™ (GPMR2400)
❍ Top Flite® Precision Magnetic Prop Balancer
❍ ™ (TOPQ5700)
❍ Straightedge with scale (HCAR0475)
❍ Cutting mat (HCAR0456)
❍ Masking Tape (TOPR8018)
❍ CA Applicator Tips (GPMR6033)

SPARE PARTS FOR THE PILATUS PC6-S

Support, but can be purchased from hobby shops or mail
order/Internet order firms. Hardware items (screws, nuts,
bolts) are also available from these outlets. If you need assis-
tance locating a dealer to purchase parts, contact Product
Support.
Service-Abteilung Revell GmbH
Henschelstr. 20-30, 32257 Bünde, Germany
Tel: 01805 110111 (nur für Deutschland)
(Anrufkosten: 14 Cent/Min. a. d. dt. Festnetz;
Mobilfunk max. 42 Cent/Min.)
Order n°
Part name
FLWA4012
Pilatus PC6-S 1450mm wing set
FLWA4022
Pilatus PC6-S 1450mm fuselage
FLWA4032
Pilatus PC6-S 1450mm elevator
FLWA4042
Pilatus PC6-S 1450mm landing gear
FLWA4052
Pilatus PC6-S 1450mm motor cowl
FLWA4062
Pilatus PC6-S 1450mm tail gear
FLWA4072
Pilatus PC6-S 1450mm canopy
FLWA4082
Pilatus PC6-S 1450mm wing struts
FLWA4092
Pilatus PC6-S 1450mm rudder
FLWA4909
Pilatus PC6-S 1450mm wing joiner
FLWA4910
Pilatus PC6-S 1450mm accessories

KIT CHECK

Before starting to build, use the Kit Contents list to take an
inventory of this kit to make sure it is complete and inspect the
parts to make sure they are of acceptable quality. If any parts
are missing or are not of acceptable quality, or if you need assis-
tance with assembly, contact Revell Product Support.
Service-Abteilung Revell GmbH
Henschelstr. 20-30, 32257 Bünde, Germany
Tel: 01805 110111 (nur für Deutschland) (Anrufkosten:
14 Cent/Min. a. d. dt. Festnetz; Mobilfunk max. 42 Cent/Min.)