- ページ 2
セキュリティセンサー AMC PROXIMITY KX-PBのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。AMC PROXIMITY KX-PB 2 ページ。
ページを印刷する
Technical specifications:
Power supply:
Current:
Max Current:
Frequency:
Protocol:
Panels:
Buzzer per tempo di ingresso e uscita sonori
Signaling led:
o Led yellow:
o Led red:
o Led orange:
o Led green:
o Reader red leds:
Dipswitch address on bus: dip in order 1 -2 -3
o OFF OFF OFF =
o ON OFF OFF =
o OFF ON OFF =
o ON ON OFF =
o OFF OFF ON =
o ON OFF ON =
o OFF ON ON =
o ON ON ON =
Dip 4 = enable/disable back Tamper (dip4 ON disabled)
Open the case unscrewing the screw on the underside, and leveraging the plastic blade, taking
care not to force it.
Fix the back cover on the wall by leaking the cable through the cable holes
Set the dip-switch address like programmed on Panel
Connect the bus (A - B - positive - negative)
Close the top of the cover by squeezing the plastic and screwing the lock screw.
Installation must be carried out following the local installation norms by qualified personnel.
AMC Elettronica S.r.l. refuses any responsibility when changes or unauthorized repairs are made to the product/system. It is
recommended to test the operation of the alarm product/system at least once a month.
Despite frequent testing and due to, but not limited to, any or all of the following: tampering, electrical or communication disruption or
improper use, it is possible for the product/system to fail to prevent burglary, robbery, fire or otherwise. A properly installed and
maintained alarm system can only reduce the risk that this happens.
PROXIMITY KX-PB
Installation Guide
13.8Vdc
15 mA
45 mA
13,56MHz
ISO 14443 Type A
X series – K series version x.73 or latest
programmable
programmable
programmable
programmable
recognized tag alert
address 1
address 2
address 3
address 4
address 5
address 6
address 7
address 8
FIXING AND CONNECTION