- ページ 8

送信機 AMC SIR SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AMC SIR Series 18 ページ。 Refrigerant gas sensor/transmitter

AMC-SIR Refrigerant Gas Sensor/Transmitter

4 INSTALLATION AND OPERATION

The following sections provide guidelines for installation; location and mounting, wiring, and

cable selection.

Mount the AMC-SIR Refrigerant Gas sensor/transmitter on a solid, non-vibrating surface or

structure in an area where the ambient concentration of gas is not directly affected by the

presence of clean air supply, ventilation systems, or blockage by surrounding articles and

sources of interference gas or contaminants. The AMC-SIR Refrigerant Gas sensor/transmitter

shall be installed in an area where refrigerant from a leak is most likely to concentrate. The

installer is required to provide the necessary mounting hardware for the unit. There is a 7/8"

conduit hole for the installation wiring located on the bottom of the enclosure, refer to Fig. 4-1.

Warning:

Mount enclosure with the sensor located as shown in Figure 4-1. This will ensure

correct orientation.

Warning:

Choose appropriate conduit hardware as to not interfere with internal components.

Figure 4-1 Enclosure Mounting