- ページ 11

マイクシステム AMC iLive X2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AMC iLive X2 16 ページ。 Uhf wireless system

Body Pack Transmitter setup

1. Before starting, please open the battery cover and insert 2AA alkaline batteries.

2. Slide the transmitter ON/OFF switch to the ON position. LCD displays the CHANNEL and

BATTERY LEVEL.

3. If you want to change the active channel, you need to change the channel into the

receiver and set receivers menu status as in picture1. After this, target transmitter's IR port in

to receiver's infrared automatic frequency window, after couple seconds channel will be

changed.

4. For the transmitter locking control press the SET button for several times until text "Lod set"

appears on the LCD screen.

After 2 -3 seconds, "LOC ON" or "LOC OFF " will appear on the display. LOCK status can be

changed by pressing " ^ " or " v " buttons. After changes please push SET button one more

time to confirm the settings.

5. You can control transmitters input gain by adjusting "GAIN" potentiometer. Input gain

knob you can find near IR port in the body pack transmitter.

6. If you want you can set transmitters RF power. If you set RF power switch to "Lo" position

transmitter power consumption became smaller. In this case battery's life became longer, but

working distance became smaller. If you set RF power switch to "Hi" position transmitter

power consumption became higher and working distance became higher too. Life of

batteries became shorten in this case.

7. If "Lo bat" text appears in the microphone display, and "BAT LOW" LED starts lighting all the

time, it shows that the battery is low and needs to be replaced.

8. When you are finished using the transmitter, switch off the power source. Remove the

batteries when storing for long time.