- ページ 5
マイクシステム AMC iMic W SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AMC iMic W Series 8 ページ。 Uhf wireless system
ページを印刷するOperating Menu
•
Before turning on the receiver, firstly ensure that the transmitter is switched off, and then
adjust receiver volume to the min.
•
Lastly turn on the transmitter power, radio frequency decibel meter on the receiver will
starts indicate RF level. After this, adjust receivers audio output level to suitable size and speak
into the microphone, the receiver audio frequency decibel meter lightens in corresponding
to microphone volume level. If voice output is not hearable and the decibel meter is not
bright, overhaul transmitter and receiver.
•
Distance between the receiver and the transmitter should not be too far (max. 80 meters).
•
Transmitter and receiver should be in direct access and least obstacles should be met in
path between them.
•
When the receiver is used with omni-directional antenna, the antenna should be minimum
0.5m from the wall, and should be kept far away from any other metal constructions.
•
Handheld transmitter should be grasped in the middle of full length, not too close to the
microphone head or power button and not too close to base antenna position. It prevents
from accidentally switching off and radio frequency suppression.
•
Changing active distance between the microphone and lips may cause fluctuation in high
frequency reproduction.