ページを印刷する
8. What to do, when...
...EasyQuick lifts a little upwards during
the cooking process, so steam escapes
through the rim of the pot?
A little overpressure has been built in the pot
➔Check if the steam valve is movable and clean.
➔Check if the sealing ring is properly fitted.
...food comes out through the steam
outlet of the steam valve during the
cooking process?
The pot is possibly too full.
➔Check the volume filled in the pot. It should
not be more than 2/3 of the total capacity or in
case of foods that well ups, not more than 1/2.
...the Audiotherm cannot be initialised?
The optic window of the Audiotherm and/or
the Visiotherm E could be dirty or have a
film of water or you are using an unsuitable
Audiotherm.
➔Clean the optic window of the Audiotherm
and/or the Visiotherm E.
➔Check if you are using the right Audiotherm:
Choose model with grey casing and black
buttons.
18
...radio contact cannot be made between
Audiotherm and Navigenio?
Check if you have proceeded correctly:
➔Set rotary knob of Navigenio at "A".
➔Switch on Audiotherm and fit it.
➔To initialse the Audiotherm turn until the
desired symbol appears.
...the radio contact is interrupted
during automatic cooking or the symbol
"initialising" flashes?
Navigenio flashes red and the radio symbol
cannot be seen any longer on the Audiotherm.
➔Set rotary knob on the Navigenio at "0" and
then again at "A".
➔To initialise again, turn the Audiotherm until
the desired symbol appears.
...during manual cooking, the symbol
"initialising" flashes?
Audiotherm signalises out with a long beep.
➔To initialise again, turn the Audiotherm until
the desired symbol appears.