- ページ 4

計測機器 amc VIBRO AV CONDITIONER 1000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。amc VIBRO AV CONDITIONER 1000 7 ページ。 Single channel conditioner icp/iepe

ページを印刷する
amc VIBRO AV CONDITIONER 1000 ユーザーマニュアル

3. Description of the AVC 1000

Fig. 3.1 shows a plan view of the AVC 1000 conditioner with marked important elements. They are
described in table below.
Item
1
BNC connectors used to connect the sensor (IN) and measuring equipment (OUT)
2
Power switch, switching to the ON position activates the device.
3
Red LED Sensor Error, continuous light indicates open or short-circuit
4
Red LED Power; continuous light indicates operation
5
Red LED Low Batt; continuous light indicates the need to replace batteries
6
Connector of AC adapter 9V DC/100mA

4. Power supply

The AVC 1000 conditioner can be powered by AC adapter supplying 9V DC / 100 mA or internal AAA
batteries. When the external power supply is used, the internal battery is automatically disconnected to
prevent the discharge.
4
Figure 3.1 View of the AVC 1000 conditioner
Description
AV CONDITIONER 1000 / ©AMC VIBRO Sp. z o.o.