- ページ 2
サービス機器 FLO-DYNAMICS BrakeMateのPDF クイック・スタート手順をオンラインで閲覧またはダウンロードできます。FLO-DYNAMICS BrakeMate 2 ページ。 Brake flush machine
ページを印刷する
QUICK START
R
INSTRUCTIONS
BRAKE FLUSH MACHINE
DISCONNECT
Close the bleeder valves. Hold the "REMOVE FLUID" button down
until all 4 wheel lights come on. Remove the suction lines from the
vehicle and return them to the machine. Press "STOP".
Lower the vehicle.
Close the ball valve on the yellow hose. While holding a rag around
the connection, disconnect the supply line from adapter. Remove
the adapter. Check the fluid level.
ADD FLUID
To add fluid, connect the wand adapter to the supply line and
press "ADD FLUID". Place wand into reservoir and open the ball
valve slowly to add the appropriate amount. When finished, close
the ball valve and press "STOP".
REMOVE FLUID
If you need to remove fluid, connect the wand adapter to the ABS
line and place wand into reservoir. Press "REMOVE FLUID" and drain
to the appropriate level. When finished, press "STOP".
COMPLETION
Replace the master cylinder cap and step on the brake pedal to
assure firmness.
DRAIN THE WASTE TANK
To drain the waste tank, connect the wand adapter to the end of
the black hose. Place in an appropriate waste container, open ball
valve, and press "DRAIN WASTE TANK".
Flo-Dynamics, Inc. • 2600 Jeanwood Drive • Elkhart, IN 46514 • 800-303-5874 • www.flodynamics.com
941523