- ページ 2

ストーブ ACR Heat Products Oakdale FB1MFのPDF テクニカル・マニュアルをオンラインで閲覧またはダウンロードできます。ACR Heat Products Oakdale FB1MF 10 ページ。

ページを印刷する

Important!

To ensure that you gain the most from your purchase, please

take a few minutes to read through this manual before lighting

the appliance for the first time.

Since April 2002 only registered competent installers can install solid

fuel appliances. Installations carried out by non-registered installers

must be inspected by local authority building control.

For more information please contact hetas at: www.hetas.co.uk or

telephone: 0845 6345626

• The installation of this appliance must

comply with current Building

Regulations and local regulations,

including those referring to national

and European standards need to be

complied with when installing the

appliance.

• Do not operate this appliance if it

becomes damaged.

• Improper use, maintenance or fitting

parts other than those approved by

the manufacturer could lead to the

appliance becoming damaged or

unsafe which in turn could lead to

personal injury or damage to the

property and will void the warranty.

• The appliance must not be modified in

anyway unless authorized by ACR

Heat Products Ltd.

Before installation, please ensure that the correct model has been supplied.

Please make a note of the serial number of your appliance in the space

provided on the front cover of this manual as this will be requested if you

require technical assistance in the future.

Please also ensure that the commissioning checklist at the rear of the manual

is completed in full.

• The appliance should be inspected

regularly to ensure the airways are

clean and free from obstruction and

the chimney swept at least once a

year.

• The external surfaces of this

appliance will be very hot to the touch

when in operation and due care will

need to be taken when operating the

appliance to ensure safety. A fire

guard should be fitted if it is likely that

the elderly, infirm or children may

come into contact with the appliance.

• This appliance must not be used as

an incinerator.

• This appliance has been designed for

intermittent operation.

Oakdale Specifications

Nominal heat output

Chimney draft required

Height

Width

Depth

Weight

Air Requirement

Flue Mass Gas Flow

CO @ 13% O

Mean Flue Gas Temperature

Efficiency

Log Length

*** Please note that Building Regulations Document J advises that additional permanent air supply is

required for appliances with an output of above 5Kw.

With modern properties additional air may be required as Document J suggests that adequate air

would be a benefit.

• If design air permeability ≥5.0m³/ (h.m²) then 550mm²/kW of appliance rated output above 5kW

• If design air permeability ≤5.0m³/ (h.m²) then 550mm²/kW of appliance rated output

• If in doubt, please consult your registered installer for advice.

NOTE: DO NOT INSTALL IN A ROOM CONTAINING AN EXTRACTOR FAN

440

5 kW - Wood

5 kW – Smokeless Fuel

12Pa

550 mm

440 mm

370 mm

90 kg

N/A ***

3.4g/s - Wood

4.7g/s - Smokeless Fuel

0.08 vol %

274°C - Wood

273°C - Smokeless Fuel

78.3% - Wood

81.5% - Smokeless Fuel

Up To 300 mm

370