コントロールユニット Flo-Tite SV SeriesのPDF インストレーション、オペレーション、メンテナンスマニュアルをオンラインで閲覧またはダウンロードできます。Flo-Tite SV Series 5 ページ。 Solenoid valves

Flo-Tite SV Series Solenoid Valves

Models SV / S4 / S4-2

Installation, Operation and Maintenance Manual

Note: Before using a valve, read the entire IOM carefully and make sure you have a clear understanding of all

Information included.

This manual describes the procedures for the safe and efficient installation, operation, and maintenance of

Flo-Tite's SV Series Solenoid Valves. Failure to follow the procedures of this manual may result in the

Flo-Tite warranty being voided. Problems with the operation and maintenance of these valves should be

directed to the nearest Flo-Tite Representative.

The SV Series solenoid operated spool valve is made of anodized aluminum or stainless steel. The spool

valves have threaded port connections and/or Namur interface. In the below form, you can find the basic

pneumatic data for every member of the SV Series Spool valve.

The SV Series direct operated valves are suitable for single (mono-stable) solenoids with standard coils, and

various explosion-proof coils certified for use in hazardous areas (Zone 0, 1, 2 and Class I Div. 1&2 Groups

A, B, C and D)

SV Series Pilot operated spool valve is suitable for single/dual (mono/bi-stable) solenoid standard coils,

Cnomo interface coils or various explosion-proof coils certified for use in hazardous areas (Zone 0, 1, 2 and

Class I Div. 1&2 Group A, B, C and D)

As for S4/S4-2 Series Namur version , the 5/2 function spool valves are available to be mounted directly for

controlling double-acting actuators and the same spool valve also can be adapted by 3/2NC Namur function

interface plate for controlling single-acting actuators.

As for S4/S4-2 Series Namur version, the same spool valve can be adapted by 5/2 or 3/2 NC function Namur

interface plates for controlling double-acting or single-acting actuators.

SPECIAL CONDITIONS FOR SAFE USE:

To ensure the proper function of the device and promote a long service life, you must comply with the

information in these Operation Instructions and the application conditions and specifications provided in the

Data Sheet. Usage of the device in a manner that is contrary to the Operating Instructions or the application

condition and specification provided in the Data Sheet is improper and will void your warranty. This device

serves exclusively as a 3/2, 5/2 or 5/3 solenoid valve for the media stated to be permissible on this Introduc-

tion and Data Sheet. Any other use is considered to be improper use. The manufacturer will not be responsi-

ble for any improper use of the device.

Changes to the product may only be the made after consulting the manufacturer or his representative. Instal-

lation and maintenance of the valve must be carried out by qualified personnel only.

22-22 IOM-SV /SV-2022

Page 1