- ページ 7

エアコン Amcor 12000EのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Amcor 12000E 13 ページ。 Plm mono blocs
Amcor 12000E にも：オーナーズマニュアル (8 ページ), ユーザーマニュアル (14 ページ)

Repeat OFF and ON

Programming the timer for repeat OFF and ON - when the unit is RUNNING.

• Perform the standard steps as described above.

• Repeat the above procedure while the digits are still flashing for setting the ON.

The circular time scale will be ON between 00:00 to the time set with the timer to OFF and

from that time until 24:00. The flashing bar on the time scale indicates the real time and

moves a segment ahead every 30 minutes. The unit will operate daily according to the timer

setting.

Programming the timer for repeat ON and OFF - when the unit is NOT RUNNING.

• Perform the standard steps as described above.

• Repeat the above procedure while the digits are still flashing for setting the OFF.

The circular time scale will be OFF between 00:00 to the time set with the timer to ON and

from that time until 24:00. The flashing bar on the time scale indicates the real time and

moves a segment ahead every 30 minutes. The unit will operate daily according to the timer

setting.

After a power failure, or after the unit has been unplugged, you will have to program the

timer settings again.

Cancelling the timer function

In order to cancel the timer programming press the

return to the time display. The daily mode will be cancelled as well. The black segments in

the circular time scale will disappear.

Direct the air flow by adjusting the grill on top of the air conditioner.

Move the grill, by pushing or pulling, in the middle (see illustration). This

will avoid uneven positioning of the grill. Adjusting the air flow is as also

possible by moving the direction of the vertical louvres.

The sleep mode function adjusts the set temperature of the unit to the thermal needs of the

body falling asleep as follow:

• In the COOL or AUTO COOL mode

• Default fan speed: LOW

• Press the

button to operate the sleep mode. Press the

cancel the sleep mode.

The set temperature will increase 1°C after 1 hour and a further 1°C after 2 hours.

• No FAN mode under SLEEP mode operation

button momentarily, then it will

button again in order to