- ページ 3

ノートパソコン Acer TravelMate TMP215-52のPDF ライフサイクル・エクステンション・マニュアルをオンラインで閲覧またはダウンロードできます。Acer TravelMate TMP215-52 48 ページ。

Disassembly Procedures

Safety Guidelines

This chapter contains step by step procedures on how to remove and de-install

components from the computer. Use the following safety guidelines to ensure your

personal safety. Each procedure included in this chapter assumes that you are preparing

your computer for recycling and disposal. By performing any of these procedures you

acknowledge that any remaining warranty applicable to your computer will be voided.

Before you start any of the procedures in this chapter, make sure to read the following

safety guidelines and the respective instructions within the chapter.

CAUTION!

Turn off your computer and disconnect all power sources before opening the



computer cover or panels.

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap



or by periodically touching an unpainted metal surface at the same time as

touching a connector on the back of the computer.

Take off any metal objects on your arms or fingers such as bracelets, rings or



watches and make sure your hands are completely dry. Even if your unit is

unplugged, there may still be some remaining electric charge.

If a component does not come out easily, do not forcefully remove it. Instead,



check that you are removing it correctly and that no wires or other parts are in the

way.

When you disconnect a cable, pull on its connector or on its pull-tab, not on the



cable itself. Some cables have connectors with locking tabs; if you are

disconnecting this type of cable, press in on the locking tabs before you disconnect

the cable.

Recommended Equipment

The following equipment are recommended to do the following maintenance

procedures:

Wrist grounding strap and conductive mat



Philips screwdriver



Plastic tweezers



Flat plastic pry



Disassembly Procedures

1-1