- ページ 5

除湿機 Amcor A D100YのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Amcor A D100Y 13 ページ。 Home dehumidifier

PLAcEMENT

Where to place the unit on the floor

This dehumidifier can be placed on firm and even floor

leaving enough space around it for the air to flow freely,

minimum 3cm at the back and minimum 5cm at the

front of the unit. The greater the space around the unit

the better.

How to fit the unit to the wall

1. Drill 3 holes according to the dimension around 185mm x 412mm in the solid

wall as illustrated on below (fig. 1) using an 8mm drill. Place the expanding bolts

through the fixing holes in the wall brackets, press them into the wall and tighten

the nuts onto the bolts (fig. 2).

2. Insert the bracket into the slotted holder at the back of the dehumidifier, just

above the filter on the rear panel.

3. Put the two rubber feet onto the round wall mounting clips, hang up the unit on

the hanger (fig. 3).

To take down the unit, just lift it a little and pull the top forward to disengage

the top bracket from the bolt and then continue to lift it off the supports at the

bottom.

4. Check the stability of unit, make sure it is secure on the wall before using.

5. Please note that the airflow next to the wall surface may cause dirt to be

deposited in some cases. Cleaning of the wall surface may be necessary.

185mm

3cm