- ページ 5

リフティングシステム Floe PWC1300のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Floe PWC1300 12 ページ。 Anchoring system
Floe PWC1300 にも：クイック・スタート・ガイド (8 ページ)

ATTACH PLATES AND POCKET WELDMENT ONTO FRAME BEAM AS SHOWN IN FIGURE 1.2. FOR

V1600, P1200, AND PWC 1300 LIFTS, USE (2) 3/8" X 2-1/2 BOLTS FOR THE LOWER HOLES AND (2)

3/8" X 2-3/4" BOLTS FOR THE UPPER HOLES. FOR P1600 LIFTS, USE (2) 3/8" X 3-1/2" BOLTS FOR THE

LOWER HOLES AND (2) 3/8" X 3-3/4" BOLTS FOR THE UPPER HOLES. PLACE POCKET AT THE

APPROPRIATE DIMENSION FOR YOUR LIFT AS SHOWN IN FIGURE 1.3. MEASURE FROM THE INSIDE

OF THE CORNER POST ON THE WINCH END OF THE LIFT TO THE CLAMP. FOR PWC1300 LIFTS,

PLACE AT 26" FROM THE CORNER POST. FOR P1200 & P1600 LIFTS, PLACE AT 41" FROM THE

CORNER POST. FOR V1600 LIFTS, PLACE AT 29" FROM THE CORNER POST.

FIGURE 1.2

SHEET 5 OF 12

*TOP HOLE

- PIVOT LIFTS

**BOTTOM HOLE

- V1600

FIGURE 1.3