- ページ 4

リフティングシステム Floe VSD 8000のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Floe VSD 8000 8 ページ。 Full length pontoon & tri-toon bunks large lifts
Floe VSD 8000 にも: 組立説明書 (8 ページ), 組み立て説明書 (12 ページ), 組立説明書 (16 ページ)

Floe VSD 8000 組立説明書

INSTALLATION

RAISE END OF LIFT WITH A HIGH LIFT JACK (OR EQUIVALENT) THAT WILL HAVE THE LEG EXTENSIONS
INSTALLED ON. FOR SMALL LIFTS, RAISE FRAME BEAM 44" ABOVE THE GROUND (FIGURE 1.1). FOR
LARGE LIFTS, RAISE FRAME BEAM 38" ABOVE THE GROUND (FIGURE 1.1A). REMOVE ½" NYLOCK NUT
AND ½" BOLT ON EACH SANDPAD, THEN REMOVE SAND PADS (FIGURE 1.2).
FIGURE 1.1
IMPORTANT NOTE
FOR INSTALLATION OF LEG
EXTENSIONS, THE LIFT MUST BE RAISED
ON ONE END (BOTH IF INSTALLING
TWO KITS). BE SURE TO PROPERLY
SUPPORT THE LIFT TO AVOID TIPOVER,
FIGURE 1.1A
2X
FIGURE 1.2
SHEET 4 OF 8