- ページ 5

計測機器 Flomec TM SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Flomec TM Series 16 ページ。 Electronic water flowmeters 3 inch & 4 inch meter sizes
Flomec TM Series にも：製品取扱説明書 (13 ページ), 製品取扱説明書 (13 ページ)

ページを印刷する

SPECIFICATIONS

Mechanical

Housing material:

Strain relief:

Housing port thread:

Cable

Cable length

Operating Temperature

Higher Process Fluid

Temperatures

Obtainable with G2

Stainless Steel Meters

Storage temperature:

Power:

Type:

Voltage minimum:

Voltage maximum:

Isolated:

Primary Output (4-20mA):

Type:

Minimum:

Maximum:

Scaled Pulse Output:

Type:

External Pull Up

Voltage

Internal Pull Up Voltage

NOTE: Customer supplied external voltage with separate power supply and a minimum

external pull up resistance of 820 ohms.

NOTE: 5VDC supplied internal on the 4-20mA board, no external supply or pull up

resistor required. Internal pull up is fixed at 100K ohm

Hubble PG7. Grip range (Cable Outside Diameter)

0.11 - 0.26 in. (2.8 – 6.6 mm)

Female 1/2-20 UNF-2B (Compatible with PG7)

Belden 9363 (22 AWG-3 conductor

with drain wire and shield)

0° to +140°F (-18° to +60°C)

When installed on G2 Stainless Steel Flowmeters, see

Ambient and Fluid Temperature Limits graph on next page

for higher process fluid temperature Limits.

If wider process fluid temperature ranges are desired,

reference information on FLOMEC® Remote Kits.

-40° to +180°F (-40° to +82°C)

Open Collector (NPN), Current Sinking

Nylon 6/6

10 ft. (3m), provided

Loop powered

8 VDC

32 VDC

Loop

4 mA

25 mA

8.0 to 26 VDC

5.0 VDC