- ページ 10

マザーボード AMD 740GのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AMD 740G 14 ページ。 Chipset & chipset based m/b for socket am2+ 64-bit quad core processor

ページを印刷する

(7) Floppy drive Connector (34-pin block): FDD

This connector supports the provided floppy drive ribbon cable.

After connecting the single plug end to motherboard, connect

the two plugs at other end to the floppy drives.

(8) Primary IDE Connector (40-pin block): IDE1

This connector connects to the next set of Master and Slave

hard disks. Follow the same procedure described for the primary

IDE connector. You may also configure two hard disks to be both

Masters using one ribbon cable on the primary IDE connector and

another ribbon cable on the secondary IDE connector.

• Two hard disks can be connected to each connector. The first

HDD is referred to as the "Master" and the second HDD is referred

to as the "Slave".

• For performance issues, we strongly suggest you don't install a

CD-ROM or DVD-ROM drive on the same IDE channel as a hard

disk. Otherwise, the system performance on this channel may drop.

(9) Serial-ATA Port connector:

SATA1 / SATA2 / SATA3/ SATA4/SATA5/SATA6

These connectors support the provided Serial ATA

and Serial ATA2 IDE hard disk cable to connecting

the motherboard and serial ATA hard disk.

(10) D-Sub 15-pin Connector: VGA1

VGA is the 15-pin D-Subminiature female connector; it is for the display devices, such

as the CRT monitor, LCD monitor and so on.

(11) Digital Visual Interface: DVI

This interface standard designed to maximize the visual quality of digital display

devices such as flat panel LCD computer displays and digital projectors.

PS/2

Mouse

VGA

PS/2

Keyboard

RJ45 LAN Connector

DVI

USB

SATA1

SATA2

SATA3

Serial-ATA1 & 2 Compatible Connectors

Line-IN

Line-OUT

MIC-IN

USB

FDD

Pin 1

Floppy Drive Connector

IDE1

Pin 1

Primary IDE Connector

SATA4

SATA5

SATA6