- ページ 4
コントローラー cnsat Smart Antenna SelectorのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。cnsat Smart Antenna Selector 14 ページ。
cnsat Smart Antenna Selector にも： 取扱説明書 (15 ページ)
ページを印刷する2.1 – First Access
This GUI is the most complete way to manage and/or use the functions of the Smart Antenna
Selector.
The "brain" behind all the processes is a Crestron DIN-AP3 automation processor which carry
onboard a GUI made by the Crestron Xpanel technology.
This GUI allow you to:
Select the target IP addresses of both antennas ACU/TV Hub, to allow the processor to link
them and decode the data stream incoming.
Configure the azimuth limits of both antennas, or better to set the "blind" sector.
Select the antennas models.
Configure the IP address, netmask and default gateway of the S.A.S. Itself
Select the operation mode, or better SMART (manual or automatic) and DIRECT.
The first installation is quite simple.
The S.A.S. is configured to have a default IP address of: 192.168.1.100
Open the folder with the Windows PC application inside (is an .exe file). The following page will
appear:
4 This means that the IP address of both ACUs/TV Hub has to be set before configuring the Smart Antenna Selector
target IP addresses.
5 The Smart Antenna Selector is available only for antennas with TCP/IP link, so the G and M series cannot be linked
Chapter 2 - Windows PC Application
5
4