- ページ 13
計測機器 CO2 Meter CM-1650のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CO2 Meter CM-1650 15 ページ。 Portable co2 welding gas analyzer
CO2 Meter CM-1650 にも： クイック・スタート・マニュアル (2 ページ)
ページを印刷する
TROUBLESHOOTING GUIDE
Symptom /
Issue
Device does not
power ON
Response
Slow
Reading Error
Red SD Card Icon
Appears
LCD Display Turns
Off During
Measurements
LCD Screen
Troubleshooting
During Use
....
Possible Cause / Resolution
Make sure the power supply is connected properly and that there is
power in the outlet the adapter is connected has the appropriate
voltage. If using batteries, make sure they are not depleted.
Check the air flow channels to make sure they are not
obstructed.
Ensure that the Inlet/Outlet Luer Cap Fittings
are removed to enable an accurate means of
sampling.
This indicates that the SD Card is either damaged, missing,
or full of data. Replace SD Card.
If the user experiences LCD display turning off during
calibration, measurements, or data logging – please
reference the "settings" section to adjust backlight / auto
power off from default settings.
If the user experiences issues with the screen orientation, this
setting can be changed by referencing the "settings" section
and adjusting the "screen auto rotate" to "NO".
......
Page | 13