- ページ 3

アクセサリー CO2 Meter TR250ZのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CO2 Meter TR250Z 13 ページ。 Oxygen sensor

TR250Z Oxygen Transmitter – Manual

Welcome

Thank you for purchasing the TR250Z Oxygen Sensor. The TR250Z is a long life 25% or 95%

oxygen level transmitter that provides multiple analog linear outputs of O2 concentrations. It's

designed to be a rugged, maintenance‐free add‐on for OEMs or can be used as a desktop device.

In addition, it can be calibrated in normal air, or can use a calibration gas of any known oxygen

concentration.

Our goal is to make high‐quality, low‐cost gas detection and indoor air quality products

available to you.

Please take some time to read through this manual in order to get the most out of your meter.

Make sure to visit our website regularly to find more information about this product and to

download the software free. Once you download and install the software, you can use the

"Check for updates" function under the Help menu to search for new updates. Please also pay

special attention to the important safeguards shown on the pages ahead.

To reduce the risk of fire, electrical shock and/or injury to persons, basic safety precautions should

always be followed when using electrical appliances, including the following:

1. READ ALL INSTRUCTIONS BEFORE USING THIS DEVICE!

2. Use only the supplied power supply to operate the unit.

3. Ensure that when sampling in a closed environment that the tubes are securely fashioned to the

device.

4. Do not operate with a blocked off sample path.

5. Do not operate the device if it is malfunctioning.

6. Do not install the device outside in exposed conditions. Due to the nature of the design the

enclosure cannot be made water‐tight and the unit must not be exposed to water.

7. Do not operate the device with the cover detached.

SAVE THESE INSTRUCTIONS!

Rev. 27 April, 2015

CO2Meter.com

Pg. 3 of 13