- ページ 7
ストレージ CO2 Meter RAD-0102-6のPDF ユーザーマニュアルとインストールマニュアルをオンラインで閲覧またはダウンロードできます。CO2 Meter RAD-0102-6 18 ページ。 Remote co2 storage safety 3 alarm
ページを印刷するSpecifications
Measurement Range
Display Resolution
Accuracy
Pressure Dependence
Response Time
CO2 AL1 (TWA )
CO2 AL2
CO2 AL3
Sound Alarm
Warm-Up Time
Power Input
Backup Battery
Relay 1
Relay 2
Relay 3
4-20mA CO2
4-20mA TEMP
Dimensions
Weight
Ingress Protection
Temperature Range
Display Resolution
Display Options
Accuracy
Response Time
Temperature
Humidity Range
Storage Temperature
7 | P a g e
R A D - 0 1 0 2 - 6 / M a n u a l a n d I n s t a l l a t i o n G u i d e
CO2 Specification
0 - 50,000ppm (5%) display
10ppm at 0~10,000ppm;
0.01% at 1-5%
+/-200ppm or +/-10% reading
Auto pressure compensation, built in barometer. (50 to 110
kPa)
CO2: <2min by 90%
5000TWA
5000ppm Default (5000ppm, 1.0%, 1.5%, 2.0%, 2.5%, 3.0%.)
3.0% Default (2.0%, 2.5%, 3.0%, 3.5%, 4.0%)
80db@10cm
<60 seconds at 22°C
Monitor Specification
9~32VDC (12~24VDC recommended), 2A.
6VDC (5.4V~7.0V), recommended capacity is 12AH
Dry contact relay controlled by AL1 (2Amp) (NO or NC)
Dry contact relay controlled by AL2 (2Amp) (NO or NC)
Dry contact relay controlled by AL3 (2Amp) (NO or NC)
CO2: Range 0-50,000ppm
Temp: Range 32 to 122° F (0-50°C)
8.25-inch x 7.8-inch x 3-inch
1.5lbs (Monitor only)
IP54
Temperature Specification:
32°F to 122°F (0°C to 50°C)
0.1°F (0.1°C)
°C/°F
Reading represents device temperature (NOT environment)
20-30 minutes (Enclosure must equalize with environment)
Operating Conditions:
32°F to 122°F (0°C to 50°C)
0 ~ 95% RH non-condensing
Storage Conditions:
-4°F to 140°F (-20°C to 60 °C)