- ページ 7
データロガー Co2meter CM-0132のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Co2meter CM-0132 16 ページ。 Co2 sampling data logger nema4
ページを印刷するSampling Data Logger User Manual
Quick Start Guide
Make sure you read through these instructions thoroughly before using your meter. This guide will help
you familiarize with your meter in order to be as productive as you need to be in the least amount of
time possible.
Power Switch
Turns the unit
on/off
Barb Fittings
Connect to sampling
system for closed
loop sampling
Power Source
These meters are powered by connecting to a suitable 24VDC power source. This is very convenient for
permanent installations.
Outputs and Cable Legend
Pump Switch
Turns pump on/off
Figure3: Components
Mini USB Port
Connect to PC for meter
configuration, data
transfer, and USB charging
Pin # Wire Color Color Legend
1
Brown
2
Blue
3
White
4
Green
5
Pink
6
Yellow
7
Black
8
Grey
9
Red
10
Purple
11
Pink/Grey
12
Red/Blue
Table 1: Cable legend. (* O2 models only)
M12 Connector
12‐pin RS‐485 connection for 24VDC power
source and controller interface (for PLC,
MODBUS, etc.)
Description
CO2 4‐20mA‐
N/O Relay
CO2 4‐20mA+
RS‐485 Ground
N/C Relay
COM Relay
Power Ground
O2 4‐20mA‐ *
Voltage Input
O2 4‐20mA‐ *
RS‐485 B
RS‐485 A
CO2Meter
PAGE 7 of 16