- ページ 5
母乳ポンプ Ameda EliteのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ameda Elite 10 ページ。 Electric breast pump
Ameda Elite にも： 取扱説明書 (2 ページ), クイック・スタート・マニュアル (2 ページ), 取扱説明書 (13 ページ)
ページを印刷する
Set Up and Assembly
Ameda HygieniKit Milk Collection System
Before Every Use
Always wash hands well with soap and water before
handling the Ameda Elite Breast Pump and Ameda
HygieniKit Milk Collection System.
IMPORTANT NOTE: ONLY USE THE AMEDA HYGIENIKIT
MILK COLLECTION SYSTEM ON AMEDA ELECTRIC BREAST
PUMPS.
Prior to starting pump, assemble and connect the Ameda
HygieniKit Milk Collection System, per included instructions.
If the Ameda HygieniKit Milk Collection System is sterile, use
as is. If not sterile, see the Ameda HygieniKit Milk Collection
System cleaning instructions.
5
The Ameda HygieniKit Milk Collection System can be used
to single or dual pump.
To single pump:
Remove one tube and
close tubing adapter.
6
E N G L I S H
Adapter Cap
2
Silicone Diaphragm
1
Breast Flange
3
4
Milk Bottle
Tubing
Tubing Adapter
To dual pump:
Both tubes should be
attached to tubing
adapter.
Elite with Detachable Power
Cord
power cord to AC power
inlet on rear of pump.
outlet.
Elite with Built-in Power
Cord
outlet.
Operating the Pump
Valve
to break suction, remove
Discontinue pumping and contact a healthcare provider.
faster. When milk flow slows, turn the 'CYCLES' dial all the
milk flow changes to pump more milk.
Removing Ameda HygieniKit Milk Collection System
from Breast(s)
tubing adapter port on
piston/cylinder.
to create an air seal.
the 'VACUUM' dial to the
right.
Setting Suction
Increase the suction by
turning the 'VACUUM' dial to
the right. Increase suction
until reaching maximum
comfort level.
If discomfort is felt at all
suction settings, turn pump
Setting Speed
all the way to the right to
increase the speed and
trigger a milk ejection reflex
turn the 'CYCLES' dial to the
left to slow down the speed
to help drain the breast
Turning Pump OFF
the 'VACUUM' dial all the
way to the left to turn the
pump off.
.