- ページ 11

サーバー Coachsound TourMaster-LiteのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Coachsound TourMaster-Lite 14 ページ。 Gps mono/stereo audio server

Coachsound TourMaster-Lite TML2504 User Manual v5.00

•

To STOP the audio, the user must first PAUSE the audio. Once paused, press the ROUTE–UP key (a.k.a. "STOP

COMMENTARY"). This will stop the current audio commentary and the system will revert back to its previous

mode of operation.

3.8 SAVING GPS WAYPOINTS

Before Coachsound systems can be used autonomously with GPS, all audio segments in the route (tour) must

have valid GPS information. The best way to do this is via the "Route Builder" tool and this is the preferred

method.

An alternative method is to manually save GPS waypoints to specific segments using the control panel. This is

done when the vehicle is stationary at the location, or travelling past the location that needs saving.

Saving a GPS waypoint to a segment while stationary at a location versus travelling past a location results in

different saved results:

•

STATIONARY AT:

for this waypoint will trigger to play irrespective of the vehicles heading;

•

TRAVELLING PAST:

the vehicles heading is saved. Audio for this waypoint will trigger to play only if the vehicle is on the

same heading as when it was saved.

3.8.1 ROUTES MISSING GPS INFORMATION STATU S MESSAGES

If a selected route has missing GPS information, then certain GPS status messages will be displayed on the panel:

•

WAYPOINTS REQ'D

DEMO SEGMENT 1

•

NO GPS WAYPOINT

DEMO SEGMENT 2

If the selected route contains segments with missing GPS information, then en-route these need to be manually

selected and played. All other segments within the route will continue to play autonomously via GPS while en-

route.

IMPORTANT: Once necessary segments in the route have had their GPS information updated manually, it is

essential to import the new GPS information back into "RouteBuilder". This ensures that the master database

for your routes/tours is kept in sync with the latest changes. See document "Coachsound RouteBuilder Quick-

Start Guide".

The GPS location is saved, but any heading setting will be removed. Audio

If travelling > 10mph (15kph) past the location, both the GPS location and

"WAYPOINTS REQ'D" indicates that there is missing GPS

information for at least one segment in the selected route.

"NO GPS WAYPOINT" indicates that the currently selected

segment is missing GPS information. (In this case "Demo

Segment 2" requires GPS information to be saved to it)