ページを印刷する6.
Place the t-nuts onto the pedestal attachment bracket loosely and
orient as shown (6a). Flip workstation onto pedestal attachment bracket
(6b). The tube ends of the clamp and t-nuts should fit into the slots in the
rails: A to A and B to B (6c). Slide pedestal along rails to desired location.
Lift and turn t-nuts 90° then tighten.
PEDESTAL
6a
T-NUT
NOTE: Adjust hyperglide to contact
the top of the storage unit.
PEDESTAL
ATTACHMENT
BRACKET
a
SLOT
b
6c
SLOT
a
b
b
a
6b
b
a
a
b
Page 5 of 10
939500422 Rev D