- ページ 13

自動車アクセサリー Coastal MYGIG LOCKPICK PROのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Coastal MYGIG LOCKPICK PRO 15 ページ。 Adapter for chrysler/dodge/jeep

Coastal MYGIG LOCKPICK PRO 据付・取扱説明書
in the passenger kickpanel area and easily reached through the glove box) to avoid your phone pairing
with 2 systems or conflicting Uconnect text on your EVIC display if equipped. If your MYGIG is a non
navigation version, your dealer has a MYGIG Uconnect accessory kit available that can be added to create
the voice recognition and Bluetooth phone functions present in the navigation MYGIGs.
10. The clock on my MYGIG radio is not correct. How do you set it?
The time on current Chrysler/Dodge/Jeep vehicles is not kept in the radio, but instead on a separate
module in the car. Late model vehicles which are being adapted to a MYGIG radio will have the system
clock present in the vehicle, so the MYGIG radio will automatically pick it up and display the correct
vehicle time. On earlier model vehicles there is no system clock so the MYGIG will simply display 12:00 or
dashes. This does not affect the navigation functions of the MYGIG radio meaning it will still give accurate
estimates of mileage and time to reach your destination that counts down as you advance along your route.
11. The steering wheel controls would advance one at a time through the navigation menu choices on older
navigation radios. Does the MYGIG radio do this?
The MYGIG radio is advanced with a touch screen and voice recognition included on the navigation
models. It is designed to allow the user to select the desired menu option with a single touch of the screen or
with direct voice commands and no longer requires you to scroll through each choice to make a selection.
12. My vehicle is equipped with a display in the dash which used to show my radio stations, etc. Will this still work
when I install the MYGIG radio?
The MYGIG LOCKPICK adapter will translate MYGIG radio operations for display on your EVIC
display. Radio modes will display along with the radio station and preset number. Hard drive and CD
functions will display complete with track number. Uconnect operations will also display along with
navigation instructions when in route. Channel number will also display for Satellite radio functions.
13. Will the MYGIG radio respond to headlights and dimmer functions when installed with the Lockpick?
Yes, the MYGIG radio will dim when adjusted with the dash mounted dimmer control. Also, when the
headlights are activated, the navigation views will switch to nighttime mode to aid in viewing at night. To
activate these functions, insure that your dimmer adjustment is not locked into the maximum brightness
setting and that the MYGIG display setting is set for automatic instead of being manually set for Day or
Night view.
14. How will the new MYGIG radio mount in my vehicle?
The pattern and spacing for the mounting screws on the original radio are exactly the same for the
MYGIG radio so it will bolt right in to the same location without any mounting modifications at all. The
MYGIG radio does have a couple of small plastic pins on the back of the faceplate to aid in positioning the
radio when inserting it before bolting it in. On some vehicles there is no alignment hole in the present dash
opening to accommodate the MYGIG plastic pins so all you have to do is clip them off. This will allow the
radio to drop in easily. The dash bezel around the standard radio is oddly shaped and needs to be trimmed
into a rectangle to match the dimensions of the MYGIG radio. Alternately, you can purchase a navigation
radio bezel for your vehicle from your car dealer or online through multiple sources. The factory
navigation bezel is designed to fit the older style navigation radio so it has a taller opening than that of the
MYGIG radio. The extra space above and below the MYGIG radio when using the factory navigation
bezel may be easier for some. All that is needed is a small strip of trim to add above and below the radio for
a clean finished look.
The LOCKPICK PRO includes the ability to be updated via a USB connection to a laptop
PC. If directed to update by one of our technicians, consult our website at
CoastalEtech.com/usbupdate.htm
not recommended to update the Lockpick without first consulting a technician.
LOCKPICK PRO USB Updates
for specific downloads and instructions for your Lockpick. It is