- ページ 6

モニター Acer AL1713bmのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Acer AL1713bm 11 ページ。 Acer computer monitor user's guide
Acer AL1713bm にも：サービスマニュアル (47 ページ)

ページを印刷する

(1)

P ower C ode

A udio cable

(2)

(O ptional )

(3)

VGA C able

WARNING:

The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure the shape of the plug matches the

shape of the socket it is inserted into, and that none of the pins are bent or otherwise damaged.

S witching the P ower

First, switch the power on to the monitor, then switch the power on to the computer. When you see the LED on the power button

go green, this indicates the computer is ready for use. Allow about 10 seconds for the video signal to appear. If you do not see

the green light on the power button or a video signal, check the connections.

A djusting display settings

A uto

A uto configuration

M inus

M enu

OSD manual

power

OSD options

Please refer to "External Controls" on Page 5.

To adjust the OSD settings:

1. Press the MENU button to open the OSD menu.

2. Use the buttons marked < or >, to highlight a control, then press the MENU

button to enter

3. Use the buttons marked < or >, to adjust the control to the desired level.

4. When you have finished making all selections, press the MENU button to exit

the OSD. (Or the adjustment will auto-save after 45 seconds.)

Attach the monitor to the power cord which should then be

inserted into a properly grounded electric socket.

Connect the audio input socket of the LCD monitor and the

computer by mens of the audio cable.

Connect the signal cable to the VGA output socket of the graphics

card on the computer. Then tighten the thumbscrews on the

connector.

If OSD is active, press to exit. If OSD is inactive, press and the monitor

will automatically optimize the display position, clock and phase of your

display.

If OSD is active, press to select or adjust OSD options.

If OSD is active, press to select or adjust OSD options. If OSD is

inactive, press once, then press the buttons marked <or > to adjust

P lus

the volume. (this function is optional only for models with speakers)

Press to view OSD.

Press again to exit.

Power on/off

Green: power on

Orange: in sleep mode