- ページ 4

ハンダ付けガン Aktacom ASE-1111のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aktacom ASE-1111 7 ページ。

Operation

1. On the front of the housing you will find the LC-Display, the

+/- button, and the ON /OFF switch.

2. After the power plug and the soldering iron have been

plugged in and the soldering iron has been placed in the

stand, turn on the soldering station with the ON /OFF

switch.

3. For the first use, in the display, you will see 330°C in the

lower line as factory default and 25°C in the upper line.

4. With the mulfunction display, temperatures from 150°C to

450°C can easily be set and confirm.

5. With the +/- button, you can set the temperature with

a resolution of rc. To do so, briefly press the respective

button. If you hold the button, the display will change in

steps of 10°C. When the desired temperature is reached,

just release the button.

6. After you have set the desired temperature, "HEAT ON" and

"WAIT" will be displayed.

7. For second use, the station will memory the temperature set

for the last use.

8. Select the right temperature for every job to avoid cold

soldering joints or damaging delicate components or

burning flux with excessive heat. Burnt flux will cause weak

joints.

Technical Data

Rated Voltage: 110-130V/60HZ; 220-240V/50HZ

Operating Voltage: 24V

Nominated Power: 48W

Fuse: Micro Fuse 1A/250V (5X20mm)

Soldering Tip temperature: 150-450°C

Display Precision: 5%

Station Dimension: 120x104x137mm

Weight: 1400g