- ページ 7

計測機器 Aktakom ACM-2311のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aktakom ACM-2311 7 ページ。 1000a ac clamp meter

The backlight function illuminates the display and is used when the ambient light to too low to permit viewing

of the displayed readings.

Press the

(HOLD) button for one second to turn the backlight on and press the button a second time to

turn the backlight off.

REL (relative value measurement )

REL key is the relative measurement key that acts with trigger . Except Hz/Duty , Diode and

continuity , other functions can do the relative value measurement.

Manual Ranging

The meter turns on in the autoranging mode. Press the Range button to go to manual ranging. Each press

of the range button will step to the next range as indicated by the units and decimal point location. Press and

hold the Range button for two seconds to return to autoranging. Manual ranging does not function in the AC

Current , Diode and Continuity check functions

Battery Replacement

1. Remove the one rear Phillips head screw

2. Open the battery compartment

3. Replace the Requires one "9V" battery (NEDA1604, 6F22 006P)

4. Re-assemble the meter