プリンター Canon 8996A001 - i 455 Color Inkjet PrinterのPDF セットアップ方法をオンラインで閲覧またはダウンロードできます。Canon 8996A001 - i 455 Color Inkjet Printer 2 ページ。 Direct printing from pictbridge-compatible digital cameras
Canon 8996A001 - i 455 Color Inkjet Printer にも： クイック・スタート・マニュアル (26 ページ), 印刷マニュアル (4 ページ)
ページを印刷する
1
Unpack the Printer
Carefully remove all items from the box.
1
i455 Series
Desktop Photo Printer
Paper Rest
Documentation
and Software Kit
i455 Series Print Head
Power Cord
Ink Tanks
BCI-24 Black
BCI-24 Color
2
Prepare the Printer
Remove all shipping tape from the front
1
and back of the printer.
Shipping
Tape
2
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
3
Press the Power button. The printer will
initialize.
Power
Power
Lamp
Button
Open the output tray, then open the front
4
cover. The print head holder automatically
moves to the center.
Front Cover
Output Tray
Serial Number
5
Write down the serial number located to
the right of the print head holder. You will
need this later to register the product.
Start Here
Easy Setup Instructions
3
Install the Print Head
Remove the print head from its package.
1
Tear at notch to open
2
Remove the orange protective cap.
NOTE: Do not touch the electrical contacts
or the print head nozzles.
Electrical
Contacts
Print Head
Nozzles
3
Raise the gray lock lever on the printer.
Slide the print head into the holder until
4
it is securely seated.
Do not press it down.
5
Lower the lever until it clicks into place.
4
Install the Ink Tanks
Remove the black ink tank (BCI-24 Black)
1
from its package and pull off the orange
protective cap.
NOTE: Avoid ink at the bottom of the tank.
Protective Cap
2
Insert the black ink tank into the slot on
the right, then push in until the ink tank
clicks into place.
IMPORTANT: For correct printer
operation, make sure ink tanks
are secure in slots.
3
Repeat the procedure for the color ink
tank (BCI-24 Color), inserting it into the
remaining slot.
4
Close the front cover, attach the paper rest
and pull out the output tray.
Paper Rest
Output Tray
NOTE: The printer will perform a print
head cleaning after the cover is closed.
i455
Series
Desktop Photo Printer
5
Connect the Printer
and Load Paper
Turn the printer off.
1
IMPORTANT: Be sure the printer
is off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
2
Connect one end of a USB cable to
the computer, the other to the printer.
USB Port
USB Cable
3
Pinch the paper guide and slide it to the
left. Load a sheet of blank paper in the
paper rest. Slide the guide toward the
left edge of the paper.
Paper
Guide
Continue with Step 6
on side two.