- ページ 32
プリンター Canon 900D - i Color Inkjet PrinterのPDF 印刷マニュアルをオンラインで閲覧またはダウンロードできます。Canon 900D - i Color Inkjet Printer 50 ページ。 Bubble jet printer direct printing guide
Canon 900D - i Color Inkjet Printer にも： セットアップ方法 (2 ページ), 印刷マニュアル (4 ページ), クイック・スタート・マニュアル (29 ページ), 印刷マニュアル (30 ページ), 印刷マニュアル (48 ページ)
ページを印刷する
Setting up the Card Slot as the Memory Card Drive of
the Computer
The memory card slot can be used as a memory card drive on the computer.
Important
To use the card slot of the printer as the memory card drive of the computer,
the printer must be connected to the computer and the Memory Card Utility
(Windows) or BJ Utility (Macintosh) must have been installed in the
computer. If the utility is not installed, install it following the installation
procedure explained in the
When Read/write mode
done.
After you are finished with using the card slot as a memory card drive for
your computer, be sure to select Read-only mode
W
1
Ensure that the printer and the computer are turned on.
2
Open the USB memory card setup window.
(1) Ensure that no memory card is inserted in the card slot. If a memory card is
inserted in the card slot, remove it. See "Removing a Memory Card" on page 9.
(2) Select All Programs
Utilities, Memory Card Utility
Utilities
Utilities
Utilities
The USB Memory Card Settings
USB Memory Card Settings
USB Memory Card Settings window appears.
USB Memory Card Settings
3
Specify the read/write attribute.
(1) Click Next
Next.
Next
Next
The Read/write attribute setting
Read/write attribute setting window appears.
Read/write attribute setting
Read/write attribute setting
(4) Click Complete
Complete.
Complete
Complete
The selected read/write attribute is saved.
Read/write mode
Read/write mode is selected, neither printing nor maintenance can be
Read/write mode
All Programs (or Programs
Programs) from the Start
All Programs
All Programs
Programs
Programs
Memory Card Utility, and then USB Memory Card Settings
Memory Card Utility
Memory Card Utility
Easy Setup Instructions
Read-only mode again.
Read-only mode
Read-only mode
Start menu. Next, select Canon
Start
Start
USB Memory Card Settings
USB Memory Card Settings.
USB Memory Card Settings
(2) Specify the read/write attribute.
Read-only mode
Read-only mode
Read-only mode
Read-only mode
... The card slot is used only for reading.
Be sure to select this mode when printing
images.
Read/write mode
Read/write mode
Read/write mode
Read/write mode
... The card slot is used as the memory card
drive of the computer. Image data can be
written into the memory card.
(3) Click Next
Next.
Next
Next
When you have selected Read/write mode
read the precaution and click Next
.
Canon
Canon
Canon
Read/write mode,
Read/write mode
Read/write mode
Next.
Next
Next
31