- ページ 43

プリンター Canon 900D - i Color Inkjet PrinterのPDF 印刷マニュアルをオンラインで閲覧またはダウンロードできます。Canon 900D - i Color Inkjet Printer 50 ページ。 Bubble jet printer direct printing guide
Canon 900D - i Color Inkjet Printer にも：セットアップ方法 (2 ページ), 印刷マニュアル (4 ページ), クイック・スタート・マニュアル (29 ページ), 印刷マニュアル (30 ページ), 印刷マニュアル (48 ページ)

Aligning Print Head - Auto head align

Aligning the print head allows you to print without shifts in the color registration.

There are two ways to align the print head, automatic or manual. First, try adjusting the print

head automatically. If the automatic print head aligning does not work or if you wish, you can

adjust the print head manually. See "Adjusting the Print Head Manually" on page 44.

With the printer on, load a sheet of Letter plain paper in the printer.

Align the print head automatically.

(1) Press the Menu

Note

Menu button.

(2) Use the

(3) Use the

(4) Use the

When Automatic Print Head Aligning Cannot Execute Correctly

When automatic print head aligning cannot execute correctly, the power

lamp flashes orange 11 times and the message "Failed to align print

head" is displayed on the LCD. Please follow the procedure below.

1. Press the Reset

Reset button to clear the error.

Reset

2. Open the front cover and check if there is ink left. If there is no ink

left, replace the ink tanks. See "Replacing Ink Tanks" on page 36.

3. Print the nozzle check pattern to verify that the print nozzles are

clean. See "Printing the Nozzle Check Pattern" on page 39.

4. Move the printer so that the paper output is not in direct sunlight

and try automatic print head aligning again.

5. If the error persists, adjust the print head manually. See

"Adjusting the Print Head Manually" on page 44.

buttons to select Maintenance

then press the OK

OK button.

The maintenance menu is displayed.

buttons to select Auto head align

and then press the OK

OK button.

The confirmation screen is displayed.

buttons to select Yes

the OK

OK button.

A pattern is printed and the print head is

automatically aligned.

Maintenance and

Maintenance

Auto head align

Yes and then press

Yes