プリンター Canon 9466A001のPDF 簡単なセットアップ方法をオンラインで閲覧またはダウンロードできます。Canon 9466A001 2 ページ。 User manual
Canon 9466A001 にも： 仕様 (2 ページ), クイック・スタート・マニュアル (36 ページ)
ページを印刷する
1
Unpack the Printer
1
Carefully remove all items from the box.
PIXMA iP90
Photo Printer
Power Cord
AC Adapter
Print Head
BCI-16 Color
Ink Tanks
BCI-15 Black
Ink Tanks
Documentation and
Software Kit
Start Here
Easy Setup Instructions
2
Prepare the Printer
1
Remove the shipping materials from the printer.
2
Plug the Power Cord into the AC Adapter. Connect the DC
plug to the printer. Plug the Power Cord into a power outlet.
AC Adapter
2
1
Power Cord
DC Plug
3
Serial Number
NOTE: You will need the Serial Number to register the product.
3
Lift open the Paper Support and TURN THE PRINTER ON. The
printer will initialize.
Paper Support
Print Head Cover
Paper Output Slot Cover
IMPORTANT: Do not open the Print Head Cover before the print-
er has finished initializing. Wait until the POWER lamp remains
fully lit.
After the printer finishes initializing, open the Print Head
4
Cover.
Print Head
Cover
3
Install the Print Head
1
Remove the Print Head from its package.
2
Remove the Protective Cap from the Print Head.
NOTE: Do not touch the Print Head Nozzles.
Nozzles
3
Press in on the Lock Button and raise the gray Lock Lever.
Place the Print Head into the holder by aligning the
4
mark with the
mark.
mark
5
Lower the Lock Lever until it clicks into place.
4
Install the Ink Tanks
1
Remove the Black Ink Tank(BCI-15 Black) from its package,
and pull off the Protective Cap.
NOTE: To avoid spilling ink, do not touch the bottom of the tank
once you have removed the Protective Cap.
2
Insert the Black Ink Tank into the back slot aligning the
mark with the
mark.
3
Press on the
until the Ink Tank clicks into place.
IMPORTANT: For correct printer operation, make sure ink tanks
are secure in slots.
4
Repeat the procedure for the Color Ink Tank(BCI-16 Color),
inserting it into the front slot.
5
Close the Print Head Cover.
Print Head
Cover
NOTE: The printer will perform a Print Head cleaning after the
cover is closed. Wait until the process is complete before pro-
ceeding.
Continue with Step 5
on side two.