- ページ 2

モニター Acer AL1913WのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Acer AL1913W 10 ページ。 Diagonal 481.9mm (19 inch) lcd display
Acer AL1913W にも：サービスマニュアル (35 ページ)

Safety Rules

The following symptoms are normal with LCD monitor and do not indicate a problem.

NOTES

Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the

Power Switch and then turn it on again to make sure the flicker disappears.

You may find slightly uneven brightness on the screen depending on the desktop pattern you use.

The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less

such as a missing pixel or a pixel lit all of the time.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain after

switching the image, when the same image is displayed for hours. In this case, the screen is

recovered slowly by changing the image or turning off the Power Switch for hours.

Note: To ensure your safety and prolong the life of the product, read the following safety rules

carefully when you use the product for the first time.

DO NOT touch the inside of the display. Only authorized and qualified technicians are

allowed to open the LCD display case.

Only hold the plug, not the power cable, when you connect the plug to the receptacle.

Make sure that your hands are dry without moisture.

Don't expose your LCD display in the rain, water, or the environment with high

temperature or humidity, such as kitchens, surroundings of a swimming pool, any place

near flower vases, etc.)

If your LCD display operates abnormally, especially if there is smoke, noise or smell,

remove the plug immediately and contact our authorized dealer or service center.

Don't touch your LCD display with your fingers or any hard objects to avoid scratching

or leaving any oil sludge on the surface of the display

Install your LCD display at the place where the risk of dust contamination is low. Take

moisture-proof and ventilation measures to protect your LCD display.

Don't install your LCD display near any heat source, such as kitchen tables, ovens, or

fire sources, or in the sun.

Install your LCD at the place where children will not touch it to avoid electric shock, or

dropping. Secure your LCD firmly or explain the safety rules to children, if required.

When installing your LCD display or adjusting its angle, attention shall be paid to the

loading capability and leveling of the display.

Don't spray or pour cleanser or water onto your LCD display or its case directly.

When cleaning your LCD display, make sure that no liquid permeates into the inside of

the LCD display or any accessory.

Moisten a clean and soft lint-free cloth with water, ammonia-free water, or glass

cleanser without alcohol, wrench it dry and wipe the surface of your LCD display gently.

It is recommended to use a silk cloth that is exclusively used to clean the display.