- ページ 14

マルチメーター Aktakom AMM-1081のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Aktakom AMM-1081 20 ページ。 Smart multimeter

5)When the resistance value is less than 10 ohm, the

beeper sound will be generated, the Display will

show "

Diode measurement

1)Connect BLACK test lead into " COM " terminal ( 3-9,

Fig. 1 ).

2)Connect RED test lead into " Ω " terminal ( 3-8, Fig. 1 ).

3)Select the " Function switch " ( 3-7, Fig. 1 ) to

" position.

4)Power On the meter by pressing the " Power On button "

( 3-2, Fig. 1 ) once, the Display will show " SMART ", the

meter is under " Smart " mode for Diode measurement.

5)a. When connected with polarity as shown in Fig. 2, a

forward current flow is established and the approx.

Diode Forward Voltage (VF) value in volt will

appears on the display reading. If the diode under

test is defective, " .000 " or near " .000 " value

( short circuit ) or " OL " ( open circuit ) will be

displayed.

" indicator.

www.tmatlantic.com

Fig. 2