ページを印刷する2. Use CH1 VOLTAGE KNOB [18] to adjust the desired voltage output value.
3. CH1 CURRENT KNOB[19] adjust the desired current output value.(Reference to Section 5.2)
4. Connect the circuit to the CH1 TERMINAL [24, 25] to get double current output.
5.6 FUSE REPLACEMENT
1. Disconnect all power connection.
2. Locate the fuse socket at the rear panel power socket.
3. Pull out the fuse socket from the power socket.
Replace the fuse with identical rating .Refer to section 3.3
4. Reinstate the fuse socket. (Re-push the fuse socket to the power socket.)
Caution:
l
Ensure no power is connected to the power supply; otherwise, electrical shock may occur.
l
Do not over push the fuse socket, or the fuse socket may be damaged.
1. Power supply X 1
2. Power cord X 1
3. Instruction manual X 1
4. Fuse X 2
6. PACKAGE
14