- ページ 3
おもちゃ aero-naut Lilienthal 40 RCのPDF マニュアルをオンラインで閲覧またはダウンロードできます。aero-naut Lilienthal 40 RC 20 ページ。
ページを印刷する
This power unit converts the Lilienthal 40 RC into a versatile electric glider. The kit includes wood parts for the pylon, brushless motor, speed control,
folding prop and spinner.
Follow these instructions carefully during construction. The length of the motor and speed control wires fit the arrangement perfectly, no changes
required. We recommend to use a 2S LiPo with a capacity of 500 milliamps, for example the Hacker ECO-X, order No. 20500241 (not included). The
speed control comes with an EC-3 plug that fits the recommended battery, so that no soldering is required.
Always let the glue dry completely before you proceed to the next building step.
Attention: Use the power unit only with the RC version of the Lilienthal 40 RC. It is not allowed to use the power unit with the free-flight version of
the Lilienthal 40 RC!
Attention: The power unit is not a toy. Children under the age of 14 may handle it only in the presence of an adult.
Technical data power unit
motor
RPM/Volt
motor shaft
ESC
plug type
folding prop
spinner
Recommended glue
material
wood/wood
wood/plastic
Recommended primer
material
wood
Race AL-LT40 28 mm
2,300 Kv
3,0 mm
10 amps
EC-3
6x3" / 15x8 cm
30 mm
glue (order No.)
UHU hart (7631/02)
UHU hart (7631/02)
item
Order No.
wood primer
7666/02
Additional components for electric
power
LiPo battery: 2S, 500 milliamps
=
(
e. g. Hacker ECO-X, order No. 20500241)
Radio control for airplanes
=
General equipment
small, light-weight radio control
=
2 servos, approx. 20×9×17 mm, weight
=
approx. 3,7 g (e. g. D-Power AS-106)